How to Change Canon TS6420 Ink Cartridge?(Replacement Steps)

Imagine printing multiple documents; an error message stops you from printing further. Now you must be wondering about the reasons and what to do next. But fear not! This is where you have to learn “How to Change Canon TS6420 ink Cartridge“ from the printer.

As a printer expert, I resolved many such issues quickly. However, this problem usually occurs when the printer’s ink is exhausted. So, you have got not to worry about so much. This error can be fixed easily, as I have explained everything step-by-step. There are certain ‘Canon printer ink replacement instructions’ that you have to follow.

This guide will teach you how to change the ink in a Canon PIXMA TS6420 printer. Ensure you follow each step properly to eliminate errors. Let’s delve into this post without any further ado.

Important Things You Should Know Before Replacing Ink

You will also encounter an error message when spare ink cautions or errors happen in your printer. It informs you about the error. In addition, you cannot print or scan anything in this case. You have to take the right action, which I’ve already discussed later in this blog.

So, before we learn ‘How to Change Canon TS6420 ink‘, you have to be aware of some replacement procedures. Ensure that you follow these procedures while replacing the ink.

1. Do not touch electrical areas such as A and B on your ink cartridge. Touching them may prevent your printer from printing properly.

2. Try to replace the ink with a new one. Old, used cartridges may cause the nozzle blockage issue. Also, you will not be notified about replacing the ink cartridge the next time you use the old one.
3. Do not remove the ink cartridge after installation; leave it in an open area to dry. To ensure optimal printing quality, you must use an ink cartridge within six months of its first use.
4. Your color ink will also be consumed when you print a black & white page.

When you find your ink cartridge empty, replace it with a new one immediately.

How to Change Canon TS6420 Ink: 5 Easy Steps 

Now that your printer’s ink is empty, you want to replace it. I have clearly explained the Canon printer ink replacement instructions below in a stepwise manner. Go through each step and start over with your printer soon.

Step 1: Opening the Printer Unit/Cover

In the first step, you are supposed to turn the printer on and open the scanning unit. While performing this step, keep the following points in mind:

1. Be gentle while holding the cartridge holder, and do not move it forcibly. Forbid to touch the ‘ink cartridge holder‘ until it stops functioning entirely.
2. If there is an ink stain inside the printer, be careful before touching it and cleaning it with tissue paper.
3. Avoid touching metallic parts inside the printer.
4. When the scanning unit or cover is open for more than 10 minutes, the cartridge holder might move, and the alarm lamp may light up. Hence, close the unit and open it when needed.

Step 2: Removing Empty Ink Cartridge

Now is the right time to know ‘How to Change Canon TS6420 Ink Cartridge‘ from your printer. Follow the steps below to remove the printer cartridge:

1. Lift the cartridge locking cover to open it.

2. After that, carefully take the ink cartridge out of the Canon printer.

Note: Discard your empty ink cartridge as per the local laws and regulations for disposal of consumables items.

Step 3: Preparing New Ink Cartridge

Grab the new ink cartridge from the packaging and carefully remove the protective layer (C) tape.

Important Notes:

• While removing the tape, ensure you are handling the ink cartridge carefully. Do not shake it; it may spill out and stain your clothes or hands.
• Do not apply the tape again after removing it; discard it completely.
• Forbid to touch the ink cartridge’s electrical components or print head nozzles. Touching them may prevent them from printing properly.

Step 4: Installing Ink Cartridge

Now, you have to insert the new cartridge into the ink cartridge holder. Next, you have to install the color ink cartridge in the left slot and the black ink cartridge in the right one.

Once installed, you have to close the ink cartridge locking cover to secure it. You have to push the ink cartridge locking cover fully until you hear a clicking sound.

Step 5: Closing Scanning Unit/Cover

In order to close the scanning unit/cover, you need to hold it up once. Then, you have to close it gently.

Note: While closing, look after your fingers.

When you start your printer after replacing the ink, it automatically cleans its print head. Do not perform other operations until your printer cleans the print head.

You might also hear some noise during the operation. Finally, you have learned “how to Change Canon TS6420 ink Cartridge“ easily with these 5 easy steps. Now, start over your printing journey hassle-free.

Frequently Asked Questions (FAQs)